The VEGO 8 Inch Auto Priming Dewatering Pump is the general purpose pump set, designed for high volume and medium head. Our pump provides excellent performance in well-point dewatering, straight dewatering and sewer-by-pass. Coupled with another trusted name in the market: the Deutz F4L912 engine (other engines are available on request), this pump provides a long trouble-free work life.
Dewatering Pumps are fitted with automatic vacuum priming system commonly used in construction, Sewage, Marine, Well-Point Dewatering, Clean water.
This pump has fitted with double vacuum pumps, enable to keep high suction lift , well suited for well-point dewatering, High discharge, Suitable for operation in high humid, hot or low temperature conditions. Move clean and dirty water. Automatic priming and re-priming. Surge protection system - prevents water escaping and damaging exhauster. Improved guard design - More safety, less vibration & Noise. Better suction lift, efficient water handling. Four-wheel site trailer, two-wheel road trailer or skid mounting as optional.
For negative suction head conditions the pump is provided with oil lubricated rotary sliding vane pump to automatically prime the suction line.
The casing has integrated part of stuffing box, made of high quality graded cast iron material. Smooth hydraulic passages ensure high efficiency.
The impellers are of closed type. Hydraulic balancing of impellers is achieved by balancing holes. The impellers are statically and dynamically balanced.
The shaft is supported by two taper roller bearings to take combined axial and radial loads, the bearings are grease lubricated. Shaft sealing is achieved by mechanical seal.
Flange dimension as per BS 10 table D.
KIRLO SKAR ENGINE 4 CYLINDER AIR COOLED
Charging alternator, Oil bath air filter,40 KW at 2000 RPM with starter motor, fuel injection pump, manual operating panel.
Four wheel trolley type with Tubular section integral fuel tank providing minimum of 32 hours operation. Single point attachment for lifting.
|S. No.||Technical Specification||DP200M|
|1||Discharge/Suction pipe connections (mm)||200/200|
|3||Total Head (M)||32|
|4||Suction lift (M)||8.8|
|5||Vaccum pump Displacement (CFM)||70|
|6||Engine - KIRLOSKAR||HA494|
|8||Engine Speed (RPM)||1,800|
|9||Shipping Dimensions (CM)||242x132x168|
|10||Net Weight (KG)||1225|